-
SmartWatt Energy Supports Barbagallo’s Express Mart for LED Gas Station Canopy Lighting Retrofit
Posted on February 16th, 2012 No commentsSmartWatt Energy has supported Barbagallo’s Express Mart, a convenience store and gas station in East Syracuse, NY for its LED gas station canopy lighting retrofit through the National Grid Small Business Program.
SmartWatt Energy conducted a complimentary energy analysis of all outdoor lighting, then proposed a plan to replace Barbagallo’s existing exterior gas station canopy lighting with LED lighting.
Barbagallo can save more than $2,000 per year after the LED retrofit. And it has also received a $4,854 rebate and interest-free financing for two years from National Grid through the program.
According to National Grid, the LED lighting retrofit will pay for itself in about 33 months. This energy savings project has removed pollutants from the air and is estimated to have the same effect on the environment as removing 20,537 pounds of greenhouse gases or planting 330 trees according to U.S. Environmental Protection Agency calculations.
SmartWatt Energy is the sole Administrator and Implementation Contractor for National Grid’s Small Business Program in Central and Northern New York. The National Grid Small Business Program helps businesses, with an average peak demand of 100 kW or less per month, upgrade to energy-efficient lighting. Through this program, National Grid will pay up to 70% of the installation costs and finance the remaining amount interest-free for up to 2 years.
-
City of Tulsa Installs High Quality, Energy Efficient LED Street Lighting in Historic Brady District
Posted on February 15th, 2012 No commentsFebruary.8, 2012 – 11:59 — jasminezhuang
Amerlux and Bridgelux Enable New Street Lighting Solutions
Tulsa, Oklahoma, known for most of the 20th Century as the Oil Capital of the World, is now leading the way with new energy efficient alternatives. Thanks to a highly successful collaboration between the City of Tulsa, U.S.-based luminaire manufacturer, Amerlux, and U.S.-based lightsource manufacturer, Bridgelux, modern, energy-efficient LED lighting are part of the restoration of Tulsa’s historic Brady district.? About 200 Amerlux outdoor luminaires based on Bridgelux LED arrays are planned to illuminate the walkways around the new Driller Stadium and park. Sixty-four were installed in 2011 with the remaining street lights slated for installation this year. The new LED lighting is anticipated, in the long run, to save the City of Tulsa thousands of dollars in reduced energy and maintenance costs, compared to the conventional High Intensity Discharge (HID) streetlights used in other areas of the city.
“The collaboration between the City and its lighting manufacturer and supplier delivered a flexible, energy- and cost-efficient solution that significantly improved the quality and longevity of Tulsa’s outdoor lighting,” said Paul Strizek, planning and contracts manager for the City of Tulsa. “Together we delivered on the City’s commitment to reduce our energy use, increase sustainability and offer our citizens a better quality of light.”
Featuring industry-leading Bridgelux ES LED arrays, the Amerlux D142 and D154 Series decorative downlight allows for a variety of optical configurations, enabling the systems to be optimized for a customer’s unique needs such as application requirements and light output. This helps to ensure that light levels and light quality meet the application requirements for a particular environment. Moreover, the Amerlux D142 and D154 downlights deliver large lumen packages of up to 7600 and 5000 lumens respectively, making it an ideal replacement for HID luminaires.
LED street lighting is an optimal solution for municipalities across the country, delivering immediate savings from lower energy costs and reduced maintenance costs. Further, high quality LED lighting increases the visibility and visual attraction of storefronts, restaurants and other hospitality and commercial environments, as demonstrated in the white paper published by LED Roadway Lighting1.
1”Incorporating Spectrum Effects for Brightness Perception and Visual Detection at Mesopic Light Levels;” Samuel M. Berman, PhD and Jack Josefowicz, PhD. -
TILS 2012: Wellypower LED Lighting Products – High Efficiency, High CRI and Stylish
Posted on February 15th, 2012 No commentsIn 2011, Wellypower’s products were awarded by iF Design, Red Dot Design, Taiwan Excellence and Golden Pin Design. In 2012, now Wellypower launch new high efficiency, high CRI and large light beam angle LED products. These products are maintained Wellypower own stylish design, and further concern about consumer really demands.
LED Sky-Line – Perfect for office lighting.
1. High luminous efficiency – 90 Lm/W, provides
ample and uniform brightness.
2. Wide light angle, perfect for general lighting.
3. Modular design can be either individually
mounted or seamlessly attached in series.
4. Flexible mounting options can be used as
ceiling or suspension lamp.
5. Slim lightweight with aesthetically stylish
design.
6. High CRI (Ra 80) show vivid colors.Power Consumption：23W / 46W
Color Temperature：5700K / 4000K / 3000K
Luminous Flux：23W－2200 (5700K ) / 2000 (4000K) / 1850 (3000K)Lm
Luminous Efficiency：23W－96 (5700K ) / 87 (4000K) / 80 (3000K)Lm /W
CRI：Ra80 (4000K, 3000K)
Illuminance：250Lux @ 2m
Size：23W－580(L)×140(W)×38(H) mm
Weight：850gColibri LED Bulb – 70g lightweight LED Bulb.
1. True incandescent bulb replacement size with E27、E26 base.
2. Streamlined casing with special thermal convection design, gives consideration to aesthetics and cooling effect.
3. Patent bending formation structure, increasing heat dissipation efficiency.
4. High penetrating optical lampshade that provide a comfortable brightness.
5. Using ultrasonic welding technology to bind the casing and lampshade, that improving safety handling.Power Consumption：8W
Color Temperature：5700K / 2700K
Luminous Flux：700 (5700K ) / 500 (2700K) Lm
Luminous Efficiency：88(5700K ) / 63 (2700K) Lm/W
CRI：Ra80 (2700K)
Size：65.6(Φ) × 118.6(H) mm
Weight：70 gCeres LED Bulb-Silver – Affordable Performance
????
1. ＞270° large beam angle with high luminous efficiency.
2. Ergonomically stylish and lightweight design.
3. Uniform brightness with no light-spots and dark shadow circle.
4. Soft light and no glare, easy on the eyes.
5. True incandescent bulb replacement-dimension, light, quality and appearance.Power Consumption：7W
Color Temperature：5700K / 2700K
Luminous Flux：620 (5700K ) / 520 (2700K) Lm
Luminous Efficiency：81(5700K ) / 69 (2700K) Lm/W
CRI：Ra80
Size：60(Φ) × 105(H) mm
Weight：75 g17W LED super slim down light – 150° beam angle for general lighting
1. Ultra-slim design only 4cm high.
2. 150° wide light beam angle can be used for general lighting.
3. High luminous efficiency provides ample and uniform brightness.
4. High CRI (Ra 80) show vivid colors.
5. Minimalist design with elegancy.
Power Consumption：17W
Color Temperature：5700K / 3000K
Luminous Flux：1400 (5700K ) / 1150 (3000K Lm
Luminous Efficiency：82 (5700K ) / 68 (3000K) Lm /W
CRI：Ra80
Beam Angle：150°
Size：170(Φ) × 44 (H) mm
Weight：310gPlease visit us in TILS 2012 at Exhibition Hall 1, booth B1010.
About Wellypower
Wellypower was founded in 1994 and is currently the world’s top-four CCFL manufacturer. Wellypower’s products main applications include LCD TV, LCD display, scanner, and advertisement lighting. With the rise of global environment awareness, we have invested heavily in search of the next-generation light source that aims at energy saving, low carbon emission, and zero pollution. The LED operations was established in 2006 and HCFL in 2007 aim to meet this demand.In 2009, Wellypower officially entered the lighting industry. Wellypower’s focus on HCFL-T5, CCFL, and LED products further establishes its presence in developing environmentally friendly lighting. In order to be better prepare for the future market and environment, the company’s motto is “deep roots and grow strong” while aggressively developing new trends and competitiveness. Our products meet the demands of backlighting and lighting applications, and consistently achieve Wellypower’s business vision – “Smart lighting, Amazing life.”
-
Philips Lumileds Introduces New Generation High-voltage LED LUXEON H
Posted on February 5th, 2012 No commentsPhilips Lumileds had developed next generation high-voltage LED, LUXEON H.
pact and dimmable drivers are already available and LUXEON H is being designed into bulbs as a single LED solution which offers significant advantages over the multi-source designs previously required. The ease of solderless assembly reduces fixture manufacturing costs.plementaryponents including drivers, optics, and clamps will be available through Future Lighting Solutions. High volume release of LUXEON H will be in March.
Several features as below
• CCT: 2700K and 3000K with minimum 80 CRI
• Superior Quality of Light – Freedom From Binning
o Single 3-step MacAdam Ellipse color space
o No flux bins; no Vf bins
o Color over angle specified at a low 0.02 du’v
• Hot tested and specified at Tj=85C
• Typical Efficacy: 90 lm/W at 40 mA, 100V, Tj = 85C
• 100V / 200V package rated for 4W – 8W
• Typical Flux: 320 – 660 lumens at 20 – 90 mA and 100V or 200V -
Lithonia Lighting Launches D-Series Size 1 LED Area Luminaire
Posted on February 4th, 2012 No commentsAcuity Brands, Inc. has expanded its LED outdoor lighting portfolio with the launch of the D-Series Size 1 LED Area Luminaire by Lithonia Lighting. The D-Series Size 1 luminaire offers a stylish, modern look ideal for manymercial and municipal applications, including parking lots, plazas, campuses and streetscapes. Its design makes a bold, progressive statement – in both aesthetics and technology – while still blending seamlessly with any outdoor environment.
When installed as a replacement for 100-400W metal halide luminaires, the D-Series Size 1 luminaire delivers an average of 65 percent energy savings and an expected service life of up to 100,000 hours or more. The nighttime operation of approximately 20 years is equal to six or more expected metal halide re-lampings. If replacing metal halide one for one, each D-Series Size 1 luminaire is estimated to save owners thousands of dollars in energy and maintenance costs over its lifetime.
The luminaire’s proprietary optics deliver better uniformity and lower power density (watts per square foot) than metal halide, allowing site owners to save on energy while still meeting IESNA standards. The optical design also minimizes the number of costly poles needed for new construction applications.
“The D-Series Size 1 luminaire is a high-performer at a great value, making it the obviouschoice for newconstruction andrenovation projects, even whenpared to traditional products” said Emily Finn, Acuity Brands Lighting Value Stream Manager for outdoor lighting products. “We are truly excited to demonstrate its capabilities to themercial and municipal markets.”
The sleek modular design of the D-Series Size 1 luminaire also allows for easy maintenance and future light engine upgrades. It is available with a wide range of options including dimming capabilities, install-friendly features and thepany’s ROAM wireless monitoring and controlpatibility. It is finished with a zinc-infused powder coat paint that provides resistance to corrosion and weathering. The D-Series Size 1 luminaire also has zero uplight and qualifies as an Acuity Brands Nighttime Friendly™ product, making it consistent with the LEED and Green Globes criteria for eliminating wasteful uplight.
This luminaire is available nationally through Lithonia Lighting sales representatives and authorized distributors. For more information about LED lighting and controls, please visit Acuity Brands and Lithonia Lighting at acuitybrands and lithonia.
-
Light Middle East, United Arab Emirates (01-Oct-2012 to 03-Oct-2012)
Posted on February 3rd, 2012 No commentsVenue: Dubai International Convention & Exhibition Centre Country: Dubai,
United Arab EmiratesStart Date: 01-OCT-12 End Date: 03-OCT-12 Visitors: 5,000+ Industry: Electronics & Electricals Coverage Area: 12,000 Square Meter 
Send EnquiryBook a Hotel
Set ReminderMapSearch for hotels in DubaiCheck-in dateCheck-out dateEVENT PROFILE
Light Middle East is the Gulf region’s leading trade show and conference for urban, architectural, theatrical, and retail lighting solutions in the Middle East. The theme of this show is Sustainability, Design, Quality and Know-How for a more responsible future. It is the perfect place to meet new contacts, expand business networks, discuss new trends and technological developments and to source products.
General Enquiry
VISITOR’S PROFILE
Lighting & Interior Designers, Architects, Light Planners / Specifiers, Design Consultants & Design Engineers, M + E Engineers, Property Developers, Construction Companies, Cities/Governments/Municipalities, Hospitality, Lighting Retailers, MEP Consultants & Contractors, Landscape Architects, Manufacturers, Wholesalers, Distributors are the target visitors.
Visitor Registration
EXHIBITOR’S PROFILE
Exhibitors include- Manufacturers and suppliers of Architectural Lighting, Compact and normal fluorescent lamps, Decorative Lighting, Display technologies, Dynamic Lighting, Incandescent and halogen lamps, Interior Illumination, Intelligent Controls, Lighting electronics, Lighting controls & solutions, Luminaries, Multi-room solutions, Optics, Outdoor lighting, Theatrical lighting, Waterfront / marine lighting.
Stall Booking
TRADE SHOW TIMINGS, ENTRY FEE AND HALL No
Business Timing: . 10:00am – 07:00pm EVENT REVIEWS & EXPERIENCE
Light Middle East-2011
Venue: Dubai International Convention & Exhibition Centre, Dubai, United Arab Emirates
Date: Sep 12, 2011 – Sep 14, 2011
Covered Area: 12,000 Square Meter -
Everlight’s New Low/Mid Power LED Family Provides Total Solution for Lighting Applications
Posted on January 31st, 2012 No commentsEverlight Electronics Co., Ltd., a leading player in the global LED industry, announces a series of Low/Mid Power LEDs* especially suited for use in solid state lighting. The new Low/Mid Power LED family has the ability to provide customers a total solution for lighting applications.
General Lighting is an interesting and broad market segment. For any individual segment of lighting there are multiple categories and sub categories with different requirements and functionalities. Outdoor lighting epasses street lighting, tunnel lighting, parking lot lighting,
landscape lighting, as well as a slew of other applications. Indoor Lighting epasses replacement bulbs, down lights, light bars, etc. As an example, replacement bulbs are further categorized down to directional bulbs, decorative bulbs, and omnidirectional bulbs. Furthermore, directional bulbs are sub categorized into MR16, PAR, AR111, etc.With a bit of application based marketing, “The Right LED” can be paired with the appropriate applications to provide the best performance and quality. Everlight's recent announcement of its Low/Mid Power LED series is directed towards light bar replacement and omnidirectional bulb applications. This series consists of 0,06W, 0,2W, 0,4W, and 0,5W products with efficiencies of >100lm/W. These LEDs are of different form factors; 3020 and 3528 (0.06W), 5050 (0.2W), and 5630 (0.4W and 0.5W) package sizes.
The 3020 and 3528 (0.06W) packages are ideal for light bar applications. Many of these small packages can be densely packed onto a linear heat sink to provide the required light uniformity of linear solutions. As a result, a linear LED light bar can emulate the appearance of traditional fluorescent tubes. In addition, because these are small, low power LEDs, the minimal thermal dissipation of linear fixtures is sufficient in maintaining a low substrate temperature as well as a low junction temperature within the LED, resulting in better performance and lifetime. To increase the advantage of using low power LEDs and improve overall light quality in the fixtures, Everlight can offer 200mcd/bin for intensity uniformity and 0.1V/bin for more consistent electrical design.
The most recent market trend and direction for the general lighting market is towards cost conscious, consumer price acceptable replacement A-bulbs. It is predicted that 257 million A-bulbs will be sold worldwide in 2013. With current price and performance pressures, the Mid Power 5630 (0.4W and 0.5W) package is aggressively surpassing traditional COB and high power LED light sources as the preferred package type for A-bulb applications. 5630 packages have superb lm/$. This is derived from thebined resources of the backlighting and the general lighting market. This shared capacity results in stable quality andmercialpetitiveness over other types of LEDs. In addition, the balance of lumens output, power consumption, and package size allow the 5630 to optimally spread light and heat by spatially distributing the LEDs uniformly in the dimensional confines of an A-bulb.
All Everlight Low/Mid Power LEDs follow ANSI binning, have a wide range of CRI values, and are undergoing LM80 testing. The flexibility of Everlight Low/Mid power LED in packaging, binning and chip selection gives engineers more options in creating unique lighting fixtures with acceptable prices.
Everlight is fostering closer working relationships between our R&D, Sales and Marketing teams to meet and exceed our customer's expectations in both product offering and technology. Everlight's Low/Mid Power LED Series are expected to satisfy the fastest-growing global LED lighting market.
*Definition of EVERLIGHT Low/Mid:
Power consumption